Accessories & Tools

Hardie™ Panel Screws

A range of purpose-made fixings for Hardie^® Plank cladding with matching coloured heads. Available in all 21 ColourPlus™ cladding colours.
Size: 4.8x38mm diameter, head 12mm.

EPDM Tape

The high-quality EPDM tape protects wooden battens from the elements and ensures clean joints. Available in 20 m rolls of 60, 80, 100 and 120mm wide. Colour: black

Hardie™ Clip

Provides extra strength when fixing Hardie^® Plank cladding, as it distributes the stress of wind blowing in over a wider area.

Gecko Gauge

The Gecko Gauge is like an extra set of hands for fast, accurate Hardie^® Plank cladding installation. It practically eliminates layout time. For 8mm thick fibre cement cladding products. Preset to the standard reveal of 150mm for 180mm wide Hardie^® Plank cladding.

Hardie™ Guillotine

Custom-designed manual tool that cuts Hardie^® Plank cladding fast and accurately every time, with no breaking, chipping or sawing dust. The cutting movement is tightly controlled to enable safe, precise cutting of even the smallest slivers of material.

Hardie™ Seal Edge Coating

These ColourPlus™ Technology matched paints, compatible with the factory finish, are essential for the correct and warranted installation of James Hardie cladding materials. Use edge coating paint for coating cut ends to ensure long-lasting performance of the facade. It provides excellent coverage in a single layer and dries quickly, saving precious building time.

Starter Strip & Ventilation Profile

Combination starter strip and ventilation profile for Hardie^® Plank cladding. Available in three depths to suit battens with a thickness of 25mm, 38mm and 50mm.

Top Ventilation Strip

Top ventilation profile which can be used for all types of James Hardie cladding. Available in three depths to suit battens with a thickness of 25mm, 38mm and 50mm.

Horizontal Drip Profile

Manufactured from high-quality coated aluminium in 3000mm lengths, these drip profiles, specifically designed for Hardie^® Panel cladding, protect the horizontal joints. Only required above 600m altitude.

HardiePlank™ VL 2-Part External Corner Trim


Available in 8 colours. Length 3000 mm.

HardiePlank™ VL Window Reveal Trim


Available in 8 colours. Length 3000 mm.

HardiePlank™ VL Window Head & Vertical Starter Trim

Available in 8 colours. Length 3000 mm.

HardiePlank™ VL J Profile

Available in 8 colours. Length 3000 mm.

HardiePlank™  VL starter profile

Provides lower edge support for the first board - for horizontal applications. Length 3000 mm.

HardiePlank™ screw for timber. T15 Torx, A2 stainless steel, 4.2×40mm, with 10mm low profile head. Primarily for installing Hardie^® VL Plank but can also be used for the installation of Hardie^® Plank in horizontal overlap option